The Future of Construction: Integrating Building Information Modeling (BIM) with AI Technology

-
The construction and architecture industries are poised for a technological revolution, driven by integrating Building Information Modeling (BIM) with Artificial Intelligence (AI). This powerful combination promises to enhance efficiency, improve decision-making, and pave the way for innovative project management and design solutions. In this blog post, we'll explore the benefits, challenges, and future potential of integrating BIM with AI, drawing insights from industry reports, case studies, and expert opinions.      Benefits of Integrating BIM with AI Enhanced Efficiency and Productivity : Integrating AI with BIM can significantly streamline construction processes. AI algorithms can automate repetitive tasks such as clash detection, data analysis, and report generation, allowing professionals to focus on strategic decision-making. This automation not only speeds up project timelines but also reduces the likelihood of human error. Improved Design Optimization ...

AutoCAD Do's and Dont's

-
autocad dos and donts
Photo by Glenn Carstens-Peters on Unsplash
AutoCAD Don’t
  • Never explode a dimension. When you think it’s necessary to explode one, don’t.
  • Never explode a hatch.
  • Do not place the Titleblock or border in Model Space.
  • Do not scale the Titleblock or border, larger or smaller, than 1:1
  • Do not scale or rotate reference files. The only exception to this is when you are dealing with a consultant who uses a different scale of units or a different origin. For example, Architectural units and Civil units are different by a factor of 12.
  • Do not “plot to fit” when plotting a drawing. Force the drawing to an accurate scale. Plot 1:1 or 2:1. Contractors and clients will most likely take scale measurements off your drawing. If the scale is off even a small amount it could be very costly, or dangerous.
  • Do not draw on layer “0”. (LAYER 0 is default layer when you open a blank drawing)
  • If you do, move it to the appropriate layer after it’s complete.
  • Do not draw on the “defpoints” layer. This layer is for AutoCAD to use for dimension information.(as for indicative purposes only)
  • Do not use cracked copies of AutoCAD Products. More info about cracked copies software products

AutoCAD Do’s
  • Always check over a drawing before you plot it. And assign it to proper plotystyles.
  • Always save a drawing before you print. Most often a drawing crashes right around the time you finish it and go to plot it out.
  • Whenever possible, use a reference when you have the same information that is shown in more than one drawing.
  • Limit the number of reference files you create. Don't use a reference file when a layer will do!
  • Zoom Extents before closing a drawing.
  • Set "SAVETIME" to 10 minutes, 15 minutes max.
  • Change the default temporary save location to something like C:\TEMP or you could even
    create a C:\AutoSave folder so you can find the files easier. The default location is buried in your windows user configuration folders.
  • When drawing dimensions, avoid dog legs (more than three lines in a leader), crossovers, and draw the leaders at a consistent angle whenever possible.
  • Make sure the leader actually touches the object it is calling out. Use your object snaps.
  • Lock your Model space viewports and assign to appropriate layer.
  • Practice purging the drawing whenever possible (especially bloated file). 
  • Populated with .bak files, Create a folder in your local C-drive, then in command "movebak" and copy your local folder to the command prompt and press enter. 
  • Practice using CAD standard in your drawings to enforce consistency and particularly useful in collaborative environments

Popular posts from this blog

7 Tips and Tricks Why Revit Structure Elements are Missing or HIDDEN

-
Image
Why Missing or Hidden: It is like hide and seek sometimes you are not aware you did it or surprisingly you don't.  Unless there is a plugin that pop-ups in you Revit someone who hides your modelled element. 1. Properties--> Under Structural--> Checked out or ticked the "STRUCTURAL". It depends on the discipline you are working on in the model. This happens when the 3D model element is showing but the plan and section are missing. 2. Look or Hit the Visibility Graphics? Under model categories, Annotation Categories, and Filter. It's all there for you to check and find out. For example, steel won't show a stick symbol. Check the visibility graphics, next model categories, look at the structural framing under that tick the stick symbol. 3. Reveal or un-Hide HIDDEN ELEMENTS. It's a blue bulb icon. Under the view control bar and reveals the elements you froze before. 4. Deleted or Purged. The only way you to chase the missing element is to look ...
Read more

How to Save AutoCAD Drawing as Read Only

-
Image
How to Save Auto-CAD  Drawing as Read Only – is quite a difficult way to answer. The only way to answer this question is by giving different options for the user to Save Auto-CAD Drawing as Read Only. Let’s see some of them below. Save Auto-CAD Drawing as Read Only Some of the different methods are listed below please choose which is appropriate in your case. Method 1 – Use Save As Auto-CAD Drawing Files as DXF (Drawing Interchange Format, or Drawing Exchange Format is a CAD data file format developed by Autodesk), by this method you actually prevent the user to make any changes to your drawing files. Making the Drawing as Read-Only Files Method 2 – Ideally you could right click on the drawing file icon (once saved), go to properties and tick read only. Ahh, well that doesn’t “lock” the drawing or anything. they can still edit it, do a Save As, or simply unchecked the Read Only option for the file once they have it. Method 3 – In case you are on a Network, you can ...
Read more

CAD Tip of the Day: How to Assign the Find Command to Ctrl+ F

-
Image
How to Assign the Find Command to Ctrl+ F (a step by step guide) Just about every Windows application you own—Word, Excel, Notepad, your browser—uses Ctrl+F to launch Find… except AutoCAD®.  Hit Ctrl+F in AutoCAD and you get … .  Really?  Because F3 wasn’t sufficient? So let’s say we set Ctrl + F to be the Find command! How to Assign the Find Command to Ctrl + F:  Open the CUI dialog box by typing CUI at the command line.  Under Customizations in All Files, scroll down and expand Partial Customization Files, then expand Custom.  Now expand the Keyboard Shortcuts node.  Under Command List, drag the Find command up into the Customizations pane and release it next to Shortcut Keys to add it to the listing. MEMO:  If the recently added command does not initially appear in the Shortcuts pane over on the right, click OK out of the CUI, then re-open it and navigate back to the Keyboard Shortcuts node under Custom.  In the Shor...
Read more